Wednesday, 21 December 2016

Competence and organization for an efficient and quality powder coating service



Competence and organization are two rewarding factors for 
third parties’ painters: we discussed about it with  
Marco Borgolotto, manager at Colorema, a company with two 
locations, the headquarters in Canzo (province of Como), 
and the “branch” in Calco (province of Lecco), within the 
client company of which is a service provider.

“Our company is an historic company of Como’s area: 
steadily growing, the relocation was a challenge that we
have taken thanks to the trust of our customer, who as the 
production site in Calco, which required a quality service 
tailored to the company's production times. The decision 
to install a new plant comes from the fact that we have 
seen increasing the number of trips from Calco to Canzo 
and vice versa, a problem that over time had become 
unmanageable and economically unsustainable. 
Thanks to the valuable advice of Pier Luigi Vertova, 
Ripol’s local agent, the one who provides us with powder 
coatings, we built the new production center and at the 
same time we have implemented the branch’s plant in Cantù 
in order to maintain our painted product’s quality”.
 
The "delocalized" expansion is very interesting: the client company, Satech Safety Technology, that operates in security arrangements for plants, decided to delegate all the finishing process to a subcontractor located in the same production area: flexibility, production time’s adaptation, constant control, logistics efficiency and competence are the reasons for this choice. Forms of close cooperation between customer and contractor as this one are not unusual: for example, it is quite common in overall automotive industry’s context (see VI 524/2011), less common in other sectors.

Friday, 28 October 2016

Vernici all'avanguardia per svariate applicazioni



Arsonsisi sviluppa e produce vernici indurenti con raggi UV denominate “UVcolor”, in
grado di soddisfare le più svariate esigenze nella verniciatura industriale di materiali
plastici, metallici e supporti speciali quali vetro e ceramica. Questi prodotti trovano largo
impiego soprattutto nella finitura di confezioni e packaging nel settore della cosmetica,
della profumeria e della cura del corpo. Le vernici a indurimento UV rispettano
maggiormente l’ambiente e rappresentano la miglior soluzione per ridurre i tempi di
produzione e ottenere un livello qualitativo molto elevato, vantaggioso anche dal punto di
vista economico. Arsonsisi offre vernici liquide UV al 100% di residuo secco, adatte a
diversi tipi di applicazione tra cui metallizzazione in alto vuoto, PVD/Sputtering e vernici
UV ibride “Dual Cure” a reticolazione mista calore – UV per oggetti tridimensionali
complessi. L’azienda ha messo a punto una vasta gamma di finiture lucide e opache
applicabili a rullo, spruzzo, velo e flow coating. Arsonsisi dispone inoltre della tecnologia e
del know-how per sviluppare vernici in polvere UV.

Monday, 17 October 2016

Convegno Nanotecnologie 2016



Nanotecnologie 2016
pretrattamento metallico

Il tradizionale appuntamento con il convegno sulle nanotecnologie si rinnova al Politecnico di Milano, a conferma che il settore conosce continuamente innovazioni e sviluppi. Anche quest’anno, docenti dell’ateneo milanese e specialisti dell’industria presenteranno il panorama odierno delle risorse nanotecnologiche disponibili, in termini di trattamenti di materiali come l’alluminio e il magnesio; di processi mirati pre-cataforesi; di sostituzione dei fosfosgrassanti; di sistemi applicativi tramite nebulizzazione e altri mezzi.
Le innovazioni recentissime riguardanti l’utilizzo concreto di vernici a base di nanotubi di carbonio e di un metodo di controllo corrosivo, in sole 24 ore, di vernici applicate, chiudono la 16^ edizione di Nanotecnologie al Politecnico di Milano.

17 Novembre - ore 14.00
Dipartimento di chimica
AULA NATTA
POLITECNICO DI MILANO
Sede di Piazza Leonardo da Vinci, 32
Milano (MI)

Il programma:
ore 14.00 Registrazione dei partecipanti
ore 14.30 Introduzione
        Danilo O. Malavolti, Presidente Anver
ore 14.50 Nanotecnologie per linee corte e non solo:
         qualità superiore e sostenibile
  Pierluigi Cerioli, Gianenrico Bianchi, Henkel Italia
ore 15.10 Thin film technology:
         l’evoluzione nel pretrattamento delle superfici
         Andrea Monti, Chemetall Italia
ore 15.30 Pretrattamento nanotecnologico per alte temperature e vernici UHT
        Andrè Bernasconi, Dollmar
ore 15.50 Nuovo processo di pretrattamento metallico monofase
         applicato ad immersione, in cabina a scatti o in tunnel in continuo
                Carlo Guidetti, Chemtec
ore 16.10 Vernici conduttive all’acqua a base di nanotubi di carbonio
                 Luca Ghizzardi, Verniciature Bresciane e Carbon Nanotechnologies  
                      Paolo Marchesi, Caldart 
      Massimiliano Bestetti, Maurizio Galimberti e Annalisa Sironi, Politecnico di Milano
ore 16.30 Le nanotecnologie di pretrattamento alla verniciatura di nastri metallici
        Ciro Sinagra, Laminazione sottile
ore 16.50 Il metodo Acet (norma ISO 17.463) per prova di resistenza alla corrosione di pitture,
                vernici e cicli vernicianti in sole 24 ore rispetto alle migliaia di ore in nebbia salina
Gianmaria Gasperini, Innovhub SSOG

Modalità di partecipazione:
INGRESSO GRATUITO
Per partecipare al convegno “Nanotecnologie 2016” è necessario preregistrarsi inviando una mail a
info@larivistadelcolore.com
entro e non oltre il giorno 15/11/16

Friday, 30 September 2016

Caber Impianti festeggia 40 anni



Caber Impianti, azienda di Carate Brianza (MB), specializzata nella produzione di impianti di lavaggio industriale di minuterie e particolari metallici, nasce nel 1976 dallo spirito imprenditoriale di Angelo Bergamini. Da sempre attenti alle tecnologie a basso impatto ambientale, Caber Impianti è in grado di fornire macchine per la pulizia dei metalli di tutti i generi e per tutte le quantità di produzione; infatti, l’esperienza pluridecennale nel settore consente all'azienda di fornire la giusta soluzione ad ogni problema. Premiata negli anni tra le aziende che si sono distinte nella categoria Made in Italy nel mondo, quest’anno festeggia 40 anni durante una serata insieme a collaboratori, clienti e amici.

Thursday, 29 September 2016

Where are water-based coatings gone?



A good question, which is difficult to answer in a comprehensive way.

On one hand, we could say that the industrial world and the new global economic conception is going in the direction of reducing costs (and pollution is a cost, indeed), improving the workers’ living conditions (even if in current water-based coatings there is a certain amount of solvent, it is undeniable that they are less toxic) and consumers’ living condition (the "indoor" emissions are virtually nil), improving material performance (almost 100% of water-based paints are used for frames painting and, consequently, they have excellent resistance "even" outside where the stresses are definitely superior to internal ones), in our “explorations” looking for virtuous companies we often stumble in organizations resigned in using traditional solvent-based paints.

The most common answer that is given by those working in this field is always the same: “I would like to use them, but they dry with more difficulty, and it is necessary to pay more attention in the preparation of the substrate, and furthermore they are more expensive”.

Is it true that water-based coating’s technology – which has been produced since the late sixties of the last century… - has not solved those problems? I don’t think so. After all there are companies that produce wood paintings – practically – only water-based, and with a recognized high quality. Unfortunately, not the Italian ones: some of them which started “in the right way”, but then they backtracked, except a couple of exemplary companies, which truly believe in a future of low environmental impact paints, starting from their sellers (at least those who we know) first ones to promote these products to users.

DRYING: Everyone assume that water-based coatings dry very slowly, slower than the solvent-based ones, without knowing that the water, with the help of some co-solvents in small quantities, forms "azeotropic" solutions that evaporate at water’s temperature (100° C), faster than toluolo (111° C), so that “hydro” paints dry out faster: seeing is believing.

SUBSTRATE PREPARATION: We talk a lot about quality, but we haven’t yet taken for granted that quality starts from smoothing, pre-treatment, in conclusion from substrate preparation?
COSTS: It is trivially a matter of market functioning, considering that if there was a greater demand, raw materials would reduce their cost and, consequently, also paints. Anyway, not to pollute is already a way to reduce costs (health care, waste, diluents, and so on).

Finally, without giving due consideration to other “defects” reported by detractors as, for example, the need to have a heated warehouse. Progress needs a healthy “natural selection”; having adequate production systems – not only plants, but also business organisation and work-condition’s respect – are essential conditions for companies’ survival.