Tuesday, 24 April 2018

SOLVENTS ABATEMENT IN SPRAYING BOOTHS AND CURING OVENS FOR PAINTS TO FINISH PLASTIC ITEMS




Coaters of manufactured plastic items must comply always stricter laws about solvent emission reduction, and they are very worried about investment cost necessary to purchase after burners available on the market (nowadays called thermal oxidisers). They must consider also to spend more resources to incinerate solvents as eventual downtimes (or in case of low concentration of emitted solvents) it is compulsory to fuel the thermal oxidiser with methane gas in order to keep temperature since Vocs coming from the booth are very low.
Came (Bussero, Milano, Italia), a company specialised in plants for solvents abatement through self-generating actived carbons, through an innovate technology developed by Ezio Crespi, the main expert in this sector. 
HT company (Cherasco, Cuneo, Italia) installed this kind of plant to abate solvents: in the area where the company operates the emission limit is 50 mg Nm3/h, the plant does not emit more than 5 mg/h (it treats 40.000 Nm3/h of polluted air coming from the booth and the curing oven)
The cost investment is less than 50% compared to a traditional thermal treatment system, and the management costs are between 50 and 100 euro monthly.
The enterprise coats plastic components for the Italian automotive industry. 
The VOC treatment plant through activated carbons is very simple ant very smart at the same time:
-          The fumes emitted by the booth and the oven (the plant treats 40.000 Nm3/h of polluted prior to filtration) are canalised to the plant
-          Vocs are absorbed by activated carbons that once saturated, are regenerated with stream vapours obtained from stripped solvents combustion.


CONCLUSIONS

The solvents abatement of the coating plants, for those who are forced to use solvent-based coatings is not a productive step but compulsory to comply polluting emissions with parameters prescribed by law. 
So those who coat must evaluate the abatement plant operational capacity; to reduce to minimum the investment cost and the operational cost: plant developed by Crespi and manufactured by CAME is a really efficient solution.

Color collection Opal, onyx, cryolite, hematite, graphite and pyrite 2018 colour trends according to Renner Italia



Color Tunes Book: the project defining Renner Italia way of colour. «With Color Tunes Book we want to suggest to interior designers and furniture brands the trendy aesthetic solutions, the most original effects, the most refined shades in a well-thought-out and innovative collection of our coatings - explained Manuel Siragna, commercial director of the company producing wood coatings in Minerbio (Bologna) -. As always, we are made to service. Even in the complex field of colour design, our aim is to offer solutions ». An ambitious project that exploits the synergy between the Milan-based studio Azzolini-Tinuper and Renner laboratories.

Elegant and minimalist, Color Tunes Book explains the painted wood with precious and refined effects. «Among the thousands of formulas and the infinite solutions offered by Renner Italia laboratories, it was not easy to make a choice - said the designer Paola Tinuper -. Downstream of a long and exciting work, we identified six nuances (opal, onyx, rhyolite, hematite, graphite and pyrite) and five special effects giving adequate answers to the most current requests».

Velati. Tramati. Vibrati. Sfumati. Marcati. These are the five special effects of 2018 edition of Color Tunes Book. The selected colours range from grey to baby blue, they change to ochre, softening the shades of yellow. Why these shades? «The colour range selected for Color Tunes Book 18 is divided into six "tone" proposals - explained Paola Azzolini - that is low-saturation shades, selected according to colour trends around the world. Two warm neutral colours (opal and pyrite) and a cool neutral one (graphite) respond to requests in the world of grey and dove-grey-brown. Also, the other three colours are part of the natural reinterpreted area: onyx, a yellow ochre suggesting the world of gold; rhyolite, a burnt orange suggesting the world of copper; hematite, a colour to cover the taste areas, reminding to trendy and easily combinable with the natural essences blue-green shades. All these colours work well together as a tracery ».

With Tramati the wood is almost confused with the fabric: «Tramati reveal the vocation of wood to play with chiaroscuro and are designed for interiors in which wood becomes the protagonist thanks to the manufacturing of the surface - added Azzolini -. It is a refined effect, reinterpreted in a daily way, a textile effect to be worn with ease on different elements: parquet, boiserie, doors, floors ... In Color Tunes Book we included images of environments and images of details to stimulate possible interpretations of the product».

In Velati, the colour respects the authentic weave of the essence, effects and colours are designed for which kind of wood? «Velati - said Tinuper - have a hyper matt (zero gloss) and smooth topcoat, in which the vein of natural wood is highlighted. The proposal was developed on durmast, a very trendy wood, acquiring with this treatment a contemporary and renewed aesthetic ». Metal, strongly appreciated even at the last sector exhibitions, seems the most distant effect from the idea of wood as a material. «Metal is a very trendy effect and has been proposed in a matt version with thin grain - revealed Tinuper - therefore a very refined metal in a range of soft shades. It can be used on large backgrounds, or reinterpreted as a detail to enhance articulated compositions with other effects. In the "traceries" section, Color Tunes Book suggests some proposals».

Finally, architect Azzolini indicated the guidelines that inspired the “behind the scenes” of the Color Tunes Book: «Our studio plunged into the research of trends in the world of furniture, interlacing information about the world of coverings, furniture, accessories and decor. We identified the most interesting trends for the world of wood coatings: the total matt effects, the micro-textures of textile effect, shades of vintage taste, the effects of micro-mixed decoration and the macro veins. Therefore, we developed a colour range by re-launching a new interpretation of stained natural wood. It’s a big project. We are very satisfied. We had the opportunity to experiment particular effects and freedom, proposing new interpretations. It was nice to interact with a prepared, young and dynamic laboratory, which in real time gave us all the answers we were looking for».

The Color Tunes Book project can be consulted on www.renneritalia.com.


Waterborne coatings: why are they seldom used even if the final consumer and law are against solvents?



Gianni Giardina interview: a plant that has grown an experience of more than 45 years in wood coating industry up.

PM- In the last ten-year period you could chase the initiation of thousands of plants that used water-based coatings.  Which would the main purpouses that facilitated that installations? Today can these motivations be valid for proposing again the use of these paints?
GG- In the next century, the heavy expansion and industrialization in wooden industry, guided to an overstated purpose of solvent-based coatings, damages to the environment and people that worked in factories.  Even the final purchasers of coated manufacts were subjected to indirect consequences. For many years thay have breathed the solvents’ vapors that came from the surfaces of the furniture bought many time before.  For different reasons, everyone wanted to eliminate solvents, and yet the change started just with the beginning of the new year.

PM- What has the change prevented?
GG: The three main characters of this sector, coatings plants and coaters, should have cooperated. At the end of the last century, the waterborne paints were unsaleable because:
1) They costed much more than the solvent ones. The lacking used quantity didn’t allow an economy of scale in research and production;
2) The technicians couldn’t guarantee a repetitive drying. For example it was very difficult to apply the spray paints, to have regularity in each part of the coated batch and, as a consequence, to provide the right quantity with the wet features necessary to paint strip water in film coating. The accidental variation of one of these parametres meant that it couldn’t be possibile to pile the batches at the end of the coating line. So painters weren’t willing to have an uncertain result and to spend more in production costs.

PM – Starting from the 19th century something has changed the scenery so much that thounsands of users successfully installed water plants in the first 5-6 years. What’s happened?  
GG: During the 1999, a young Friulian engeneer who worked in a regional research center, accidentally changing some wavelenghts, identified some anomalies on the samples.  Through common knowledges he put them through me. This made me build a prototype and, thanks to others consolidated technologies, I could develop a deliver coating water system, without heating the batch and using the air of the environment for the exsiccation.  
With the new technology we called different clients interested in water-based coatings and so we successfully sold and installed the first microwave technology plants.

PM – So were coatings already ready?
GG: Not yet, but by removinq the exsiccation air, the users started working and producing with water-based paints. In the mean time, in the six months between the acceptance of the client, the installation and the final delivery, the technicians could create coatings with the quality requested by the consumer.   Counting on sure consumption and a huge potential market, the coatings producers throw themselves in the research, succeeding in reducing prices and giving to the water-based coatings the same features of the solvent-based ones. 

PM- What did you do to fight the scepticism around water-based products?
GG- We work a lot with marketing. For each new functional plant, we realized an interview to the client, photos and videos. All the multimedial material was sent by email to hundreds of potential clients and posted on the website. So anyone could call into question the words of a client that was satisfied by its painted production with water-based coatings while it was piled at the exit of the oven. This had the effect to put an increasingly attention to the waterborne paints and the new plants.
In the mean time others technologies such as IR and vertical ovens could have been successfully proposed by other technicians. In just a few years hundreds of plants have been realized for furniture, kitchens, doors and windows, contours, chairs, coffers and so on. 

PM- What’s happened then? Why did statistics tell us that the water-based products consumption is decreasing?
GG:- First let’s specify that the purpose of water-based paints on wooden doors and windows could never change. The furniture is a different story.
Thanks to the general crisis developed all over the world, the furniture sector have seen both the crisis of the water- based products and of all the application systems projected for big ranges of batches. The companies, in order to sale and please their clients, accepted also little orders using plants projected for large volumes of batches. Anyone was ready to work waterborne little batches, so they hand painted in booths or relied on third party that worked in booth too.
Working in coathing booths without the right equipment meant to entrust to the weather conditions for the exsiccation and this is really dangerous. We must add that, when you apply the coating above both the surfaces and sides of a patch, it’s important to do it with the same paint in favour of the final quality.
There’s a waiting time in vaporizing all of the sides of the patches. It could be a long wait if you use water-based products without the right plant, so the pot life will surely be already expired and so you must throw away the coating and make a new one. The new paint could not have the same shades of the first one.  In conclusion: the coater choose much more safe and rapid solvent-based paints, fast drying on a carriage, even without adequate plant.

PM- So how do you get out of it? Do we have to wait for the end of the crisis to not pollute by using industrial plants?
GG:- Not necessary, exsiccation water-based paints safe systems exist for single carriages. These systems exsiccate little batches in few time to turn patches by using the same coating above all the sides.  I built about ten for clients that already worked with little batches. In Italy there are about three technicians that produce them.  They are small low cost plants. 

PM- Ikea is an example of how we can create a market on sustainability and convince the consumer that we can and must produce respecting the environment with suitable materials, including paints. This philosophy has become their commercial strength. The "People & Planet" program foresees that by 2020 it will be 100% eco-sustainable. The tendency of the legislator seems to want to limit more and more all the products considered dangerous for human health, such as formaldehyde, heavy metals, solvents, and CO2 emissions. How can painters follow this "Ikea trend" and respect the laws?
GG- Ikea philosophy is irreversible, scaled-world. You can try to fight just on some segments of the market, even if today the alternatives could always be found.  Some years ago Ikea was known as a producer of economic and unreliable furniture. Time after time it invested in quality and marketing. It made the world understand that the beauty and the bad are individual, because they have to satisfy the likings of all the world but quality, price and reliability are general such as the environment respect.
The furniture maker that wants to follow Ikea or similar companies, naturally for a different clients range, can do it by investing in design without giving quality, reliability and environment respect up. He would be defeated before to start fighting. 

PM- In summary, what should we do?
GG- With the crisis the furniture makers had rightly to adjust their general costs to the sales volume. Now they have to adapt the plants to the new productive needs. We talk about flexible plants, that accepted one batch, automated and that use unpolluted paints. The tecnichians could be the main characters in this adaptation. Then everything must be given to marketing and communication.  
Only with these purposes they could enter the increasingly aggressive market. 

Sirca goes green




Thinking about the future by living the present. This is the philosophy that motivates everyone who believes in a better world. This is the definition of resilience, the people capacity to change their style of life to solve the problems. Never as now we are witnesses of lots of weather, environmental and energetic crisis.
We need concrete actions. Today it’s important to do what’s right.
The weather changes represent an urgent and irreversible threat for humans and the planet. The consumers has new moral values such as the environment respect, the decrease in energy needs and in the consumption of no-renewable energies with the consequent decrease of emissions of gas in the atmosphere. This new awareness of the consumers provided the change need.

The climate change is not just an environmental problem, it’s a health threat, because in a warmer world the infectious deseases easily spread. It endangers the food production, making the soils dry and not good for the nourishment production or the pasturage.
It damages the soil itself by flows produced by the increasing level of seas caused by the fusion of the polar caps. Our destiny is inexstricably linked with the one of all the species and ecosystems of the planet.

It has never happened such a high concentration of CO2.  If it smells we would understand the real danger. In May 2017 CO2 reached the highest monthly levels ever, as it shows by the underlying chart National Oceanic and Atmospheric Administration statunitense (Noaa).

Today both consumers and companies perceive the necessity to enter in this new socio-economical directive. The main principles are energetic efficiency, low carboon footprint, high- tech content in production and products, the use of renewable and sustainable resources, optimization in the use of raw materials and responsible use of products made by raw materials derived from renewable sources.
During its consumption it goes not only from cradle-to-grave, but from cradle to cradle that includes its rycicle.
To ricycle the garbage means to give a value to the garbage itself, by recovering raw materials useful for the production of new materials.

The wooden furniture, coatings and raw materials for the paint industry sectors move fastly to this direction.
The furniture producers and its suppliers strive to have a much more sustainable production. To reduce carboon footprint they use specific coating materials and products with a low environmental impact effect (such as waterborne products). They allow to have a more healthy workplace and to considerably improve the quality of own domestic indoor environment.

Sirca has always believed responsibly in these values and put attention to these topics. In the last ten years it took a green route to strongly reduce its own products’ carboon footprint, by investing time and resources in reasearching and developing ecofriendly and sustainable products, anticipating times and showing a strong environmental ethos. You could not recycle a coater but you can produce one made of bio-polymers produced with bio-monomers derived from food industry wastes.  

Technical solutions S-Cover by Sirca

The forefather of this family has been OW120 and its own catalyst CWN3IO, bicomponent waterborne primer, presented in April 2017, at the European Coating Show.

A bath furniture has been made and exposed in Nuremberg during the ECS, painted with open-pore coating that guarantee a natural effect. The main goal was to demonstrate that you can reduce the use of fossils without losing quality, performances and style, by creating an added value for the consumer, another step ahead for a more sustainable life.

The choosen product, used as a typical water-based bicomponent product, stands out for its 75% renewable content in the A part and 55% in the B part. 

Since that moment R&D Laboratory of Sirca has completed the technical solution available to satisfy the interior furniture market, adding matt lacquered finishes, one-piece and two-component, and textured, of the desired final color. Further completion is given by a trasparent primer specific for parquet, that bind high estetical qualities with elevated performances and best chemical and physical resistance.

The same attention and commitment have been dedicated to the frames sector, by developing high quality products and outstanding yellowing resistances and to the atmospheric agents, both transparent and laquered.

Sirca can praise a complete range, unique in the wood coating industry, technical ecofriendly and sustainable tecniques that could embrace every type of producers and final users need.  


Designing green paint together: one block at a time





A master craftsperson is striving hard to create a beautiful, practical and ethical product: one piece at a time. Chances are, this scene sounds familiar. Perhaps the description fits someone you know; maybe even yourself. But it also fits a completely different type of craftsman: one who wears a white coat instead of a regular jacket; and who works in a lab instead of a studio or workshop.

At DSM, our scientists don’t make furniture and they don’t build houses. But like most designers we know, they are optimists – imagineers who spend their lives wondering ‘what if’; continually reframing challenges and reiterating their work in pursuit of the next big breakthrough. Sometimes, a ‘what if’ evolves into a ‘why not?’ And occasionally…it becomes a reality. One such example is Decovery®: a family of paint resins from DSM that bind the product’s ingredients together and essentially represent the heart & soul of the paint. Most importantly, Decovery® is made primarily from plants.

The path to plant-based paint
That’s right. We can now design paint from plants, seeds and leaves in much the same way that today’s design industry creates products from natural, sustainable materials. What’s more we can achieve this while delivering the very finest of finishes.

It’s this ability of Decovery® to benefit planet and performance that we believe represents the next big breakthrough in sustainable paint – based on principles that will be familiar to many of you in the design industry. In fact the concept behind the plant-based building blocks that we use to create Decovery® resins are remarkably similar to those that designers, builders and architects use. The only difference? Our scientists are fitting their block together on a far smaller scale (think seven times thinner than a human hair), and instead of being made from bricks or concrete, our blocks come from plant residue.

Specifically, we extract the sugars, starches and natural oils from trees and agricultural waste through process known as biomass conversion to create our building blocks – which are completely free of fossil-based materials. So for our planet, the benefits are clear: a reduced carbon footprint, which in turn helps us tackle climate change. While for people - and more specifically your customers - plant-based paint means the ability to breathe fresh, clean air free from solvent fumes.

Want a sustainable alternative? Just ask!
But before getting too pleased with ourselves, we’re the first to admit there remains a long road ahead. To put that into perspective, today Decovery® resins are up to 50% plant based, so we’re only halfway to creating completely natural paint resin; and it’s here where our counterparts in the design industry can really help. To make our dream a reality we need everyone who uses paint – from designers to manufacturers to painters themselves and everyone in between, to come together to fuel this movement towards a 100 % plant-based finish.

The good news? We’re making progress. For example, our team recently spoke to a door manufacturer about using more sustainable paints. His honest reply was that he’d never thought too much about it - although he was willing to listen. When we explained the sustainable concept behind Decovery® - and how it delivers a win-win-win that benefits planet and performance – he was convinced. Now our team is working with this designer to develop a new, more sustainable paint. So if you’re interested in doing the same why not get vocal – and ask your regular supplier for some sustainable alternatives?

You may well discover that the coating on your product really does start to become…the icing on the cake.

Wednesday, 28 March 2018

Diversification and research for the construction of customized turnkey wooden structures



"Every single element is perfectly connected to the others, every need has a specific, precise solution".This is one of the maxims with which Legnostrutture of Villacidro, in the province of Cagliari defines his own activity. This is exactly what is perceived within the company, which is specialized in the construction of laminated wood structures, from the simplest piece to the most complex and committed to respond to the most varied technical requirements. and aesthetics.

 The factory was born in 2009 with the goal of proposing itself on the local market as a partner for the companies, differentiating immediately various aspects of their work compared to those of traditional carpentries and without seeking direct competition with them.

The other distinctive and fundamental feature of the company is surface treatment. Today Legnostrutture is able to offer a customized finished product, having a wide range of colors and effects developed over time to fall back on, also thanks to the collaboration with HDG .

As in many other companies, white wood impregnation presented some inconvenient problems, including yellowing. "Together with HDG we have succeeded in devising a product that solves this problem - Marco Murgia explains - and, from that moment on, we have had a substantial growth in the demand for white coatings".

Due to the excellent result, Legnostrutture and HDG have continued research on white coatings by studying the automatic application, another delicate point.  
"Another difficulty related to white coatings was precisely the application of this product with the impregnation machine - Enrico Bacchini continues -: risk of non-uniform penetration and requirement for manual processing (and therefore of an enormous work force). Together with Marco we have conducted a careful study aimed at enhancing the performance of the product, making it suitable for automatic application. We then followed the same path for other special and exclusive effects".

IN PRODUCTION

The material that arrives in the company is deposited in the warehouse and divided into lots, so as to maintain traceability. The cutting with numerically controlled machines is the first phase of the production process. Once cut, the material passes to the brushing cycle, or directly to the impregnation zone. In the presence of particular structural elements (knee beams, trusses and other), the piece goes through an intermediate phase of assembly.  
The application of the moietta is an essential step, because it allows to unequivocally identify the lot, which is finally placed at the exit.

CONCLUSION

"We attempt to provide our customers with an impeccable service," concludes Marco Murgia, "Making sure they receive the collaboration and technical support that are necessary to better carry out their projects. We focus a lot on technologies, innovation and product customization. And this also thanks to our partner, as well as supplier, HDG."

Monday, 26 March 2018

Professionals and companies meet color trends





"Color can contribute to the success and value of industrial products". This is the message that Mattia Bardelotto of Colori Millennium, a Lechler retailer of Cessalto (TV), delivered to the participants of the event "The Color Experience 2018". A learning experience and an occasion to build synergies between entrepreneurs and architects, designers and engineers, organised by the Venetian company in January thanks to the support of Lechler and the international project "Color Design", the concept that unites the development of chemistry and coatings with the evolution of the color language.

More than 150 participants hosted in the beautiful Polvaro estate in Annone Veneto, in the heart of one of the most important wine-making areas, participated to an exposition on color trends for architecture, furniture and design, with an introduction on the use of color in indoor spaces by Francesca Valan, industrial designer, expert and university professor on "Color Design".
 
Subsequently, a round table moderated by Mattia Bardelotto himself was organized, and the present entrepreneurs explained that the color project launched in 2017 thanks to Colori Millennium and Lechler resulted in successful projects. In particular Forme d'Acqua, a company that creates unique works with water, presented their industrial products which set up a project of industrialization of furniture elements that combine design, water, light and special materials ( stones, marbles, hand-made glass); Oikos Venezia ("Architetture d’ingresso"), a well-known company that produces designer armored doors; Rotaliana, which produces iconic lamps combining tradition and innovation, ancient roots and contemporary thought.

Friday, 23 March 2018

Customization and versatility in the frame industry: the Cornici Incom case.



Cornici Incom of Vicopisano in the province of Pisa has been producing and selling frames since 1975, in Italy and abroad. The entrepreneurial ability of the owners has immediately set production according to industrial criteria, automating it and constantly updating itself on the best technologies available on the market. Today the company is a reference point, on a local and regional level, for the industry.

Quality and attention for the customer and the supplier, these are the strengths of the company, as illustrated by Matteo Morganti, the Incom's head of production, and confirmed by Davide Cioni, head of the Tuscan store Nuova Sivam.

PRODUCTION AND COATING

The raw material arrives already skewed in the company: it’s mostly pine, fir and ayous wood, coming exclusively from Italian territory (the company is FSC certified) and is placed in the warehouse. Once received, the order is processed according to a processing card that is inserted inside a "production box" in which all the available samples are available that the operator has available to develop the correct cycle.

The production department, which is spread over 5,000 square meters, is completely automated and consists of: hot stamping, two coating lines and two for the division of the rods, hot gilding  and packaging. The rod is first inserted into the molding machine equipped with rollers that are heated and give the shape that the frame must have. 

Once printed, the rod is loaded onto the conveyor belt of the painting lines, which conveys it to the sanding and application phases of the base. After 24 hours of drying, the final layers of coating are applied to the material with the same machine. The standard coating cycle consists of four total hands. Depending on the requests, the rods are then divided by special machinery, hot-gilded automatically or embellished by hand. The supply chain closes with packaging, which is also automated, and includes the boxing.

CONCLUSION


"Thanks to the special effects that we are able to achieve thanks to Nuova Sivam paints - concludes Matteo Morganti - and thanks to the excellent raw material we work, we are also able to include the foreign market among our customers: Europe, Central Asia, Russia and the United States, countries that recognize and appreciate Italian excellence. The handcrafted finishing is another element that identifies the originality and the utmost attention to detail of our work. Thanks to our industrial nature, we are able to be competitive, combining rapid production times and personalization of the single order, also thanks to the collaboration with Nuova Sivam".